2010 Toyota Corolla Bumper Replacement

ID: 206882

Description: Front bumper damage is one of the most common...

Steps:

1. Turn off the vehicle, open the hood, and prop it open with the hood prop.

2. Using the power drill, remove the fasteners along the top of the bumper.

3. Remove the clips using your hands.
4. Remove the socket head cap screws with a ratcheting socket wrench.

5. Using the power drill, remove screws and clips from the wheel well liners and remove the lower bumper fasteners underneath the car on the right side.

6. Using the power drill, remove screws and clips from the wheel well liners and remove the lower bumper fasteners underneath the car on the left side.

7. Carefully pull the bumper cover forward and disconnect the fog light wiring before fully removing the bumper.

8. Align the replacement bumper with the mounting points and reconnect any electrical connections.

9. Using the power drill, reinstall and tighten all four top bumper fasteners and any other clips or socket head cap screws.

10. Using the power drill, reinstall the two lower bumper fasteners and verify the bumper's proper fit and alignment.