Google Pixel 10 Pro Fold Flip Battery Installation (Inner Screen Assembly)

ID: 206887

Description:

Steps:

1. Remove any of the white stickers and yellow tape from your replacement inner screen assembly.

2. Use tweezers to remove the blue liner from the bottom of the black pull tab.
3. Press the pull tab down to adhere it to the frame.

4. Use tweezers to remove the blue liner from the secondary flip battery adhesive strip.

5. Use your fingers, or tweezers, to remove the large blue liner from the main flip battery adhesive strip.

6. Before removing any liners, check that your flip battery jacket matches the size and shape of the cutout in the frame.
7. The clear liner should face the frame.

8. Peel off the flip battery jacket from its clear liner.
9. Align the jacket so it doesn't overlap with the flip battery adhesive.
10. Lay the jacket on the frame.

11. Use the flat end of a spudger, or your fingers, to press down the jacket and adhere it to the frame.

12. Use your fingers, or tweezers, to remove the blue liner from the flip battery jacket.
13. At this point, all of the liners should be removed from the battery well. If any liners remain, remove them now.

14. Be careful during this step, as it's easy to stick the adhesive in the wrong spot. Take your time and work slowly.
15. Align the top edge of the flip battery with the top edge of the battery well.
16. Lay the battery over the frame.

17. Press down along the perimeter of the flip battery to adhere it to the frame.
18. Let the phone sit for an hour for the adhesive to cure.