iPhone 17 Pro Rear Camera Assembly Installation

ID: 207258

Description:

Steps:

1. Lay the rear camera assembly in its recess.

2. Use your finger to press and connect the three camera press connectors onto the logic board.

3. Use a Torx Plus 4IP screwdriver to install the three rear camera assembly screws:
4. Two 4.0 mm‑long screws
5. One 4.4 mm‑long screw
6. Make sure to install this in the proper screw hole.

7. Use tweezers to latch the rear camera connector cover onto the logic board and lay it in place.

8. Use a tri-point Y000 screwdriver to install the 1.0 mm‑long camera connector cover screw.