iPhone 17 Pro Taptic Engine Removal

ID: 207263

Description:

Steps:

1. Use a JIS 00 screwdriver to remove the two 2.0 mm‑long screws securing the ground clip.

2. Use tweezers to remove the ground clip.
3. The clip is delicate and easy to lose. Store it in a safe place for reassembly.

4. Use a JIS 00 screwdriver to remove the three 2.0 mm‑long screws securing the flex antenna.

5. Use your fingers or a spudger to swing the flex antenna out of the way to access the screws beneath it.

6. Use a standoff screwdriver to remove the two 4.0 mm‑long screws securing the Taptic Engine.

7. Use your fingers to flip the Taptic Engine out of its recess and onto the edge of the iPhone.
8. Hold onto the Taptic Engine during the next step to prevent straining its cable.

9. Use the point of a spudger to pry up the Taptic Engine press connector and disconnect it.

10. Remove the Taptic Engine.