MacBook Neo Bottom Cover Installation

ID: 211906

Description: Prerequisite only guide to install the bottom...

Steps:

  1. Align the bottom cover with its screw holes, then press on the two short sides until the clip on each side snaps into place.
    2. Step image Step image
  2. To ensure alignment, we recommend you partially install all the screws before fully tightening them.
  3. Use a P5 pentalobe driver to install the eight screws securing the bottom cover:
  4. Six 4.1 mm‑long screws
  5. Two 4.5 mm‑long screws
    6. Step image
Back