Epiphone Les Paul Custom Tuning Keys Replacement

ID: 212482

Description: This guide aims to help users understand and...

Steps:

1. Begin by loosening the strings of the guitar by turning the tuning pegs.
2. When the string is fully loose, simply remove the string from the tuning key.

3. Moving to the bottom bridge of the guitar, push the string through the bridge.
4. The string should easily slide out of the guitar.

5. Using a 10mm sized wrench or socket wrench, place it over the threaded nut on the tuning key being replaced.
6. Turn the wrench until the nut is loose enough to be removed.
7. Remove the threaded nut and the washer beneath the nut from the guitar head.
8. Set these two pieces aside, just in case.

9. Flip the guitar over, so that the back of the guitar is now face up.
10. There are small screws still holding the tuning key in place. To remove these screws, use a #0 or #1 size Phillips screwdriver.
11. Place the removed screws aside.

12. The tuning key can now be fully removed from the guitar head.