HP ProBook 440 G6 Lower Case Replacement

ID: 213078

Description: Does the lower case of your HP ProBook 440 G6...

Steps:

  1. Using a Phillips #0 Screwdriver, remove the two 5 mm screws on the front-facing side of the lower case.
  2. Using a Phillips #0 Screwdriver, remove the remaining five 5 mm Phillips screws securing the lower case.
  3. The two screws in the front of the backplate are of a differing size to the other five.
    4. Step image Step image Step image
  4. Starting under the display, carefully use a plastic prying tool (iFixit opening tool) to disengage the retaining clips.
  5. You may hear soft clicking sounds as the clips come undone.
  6. Once a corner or edge starts to lift, slowly slide the tool along the edge to loosen more of the bottom panel.
  7. Keep working around the edges until all the clips are loose.
    8. Step image Step image Step image
  8. Gently lift the rear of the cover to disengage it from the computer.
  9. Carefully remove the bottom cover from the computer.
    10. Step image Step image Step image
Back