Anker Soundcore Boost A3145 Base Replacement

ID: 213371

Description: Over time the base of your Anker Soundcore...

Steps:

1. Insert a spudger between the base of the speaker and its body.
2. Along the seams of the base, begin prying at the hooks until you hear a “click”.
3. Once you get a slight lift, slowly glide the spudger throughout the base to unlatch all the hooks.

4. Using the spudger, dig at the center of the speaker to pry at the adhesive keeping the remaining base attached (Utilize the image in Step 3 as a reference for where the adhesive is).
5. Some sort of heating element may help in softening the adhesive, however both excessive heat and moisture are not recommended!

6. Lift the old base up and replace the new base, relatching the new base with a “click” for each hook.
7. It is recommended that any old adhesive be cleaned off and replaced prior to reinstallation.