Altyk Le petit PC portable L14 Speaker Replacement

ID: 219120

Description: Replace the speakers in an Altyk L14 computer.

Steps:

  1. Turn your machine over so that the bottom is facing you.
  2. You have 10 screws facing you:
  3. 8 identical short Phillips screws (PH000)
  4. 2 identical long Phillips screws (PH000) in the corners near the clutch hinges
  5. Once the screws are removed, you can pry up with an opening pick as shown in the second photo. There is no risk of breaking any snap fits; there are none.
    6. Step image Step image
  6. Locate the battery connector.
  7. There are two ways to remove the battery:
  8. Either use plastic or ceramic tweezers to separate the connector from the motherboard by using the corners of the connector as indicated in red.
  9. Grasp the battery wires shown in blue and pull gently toward you to disconnect the battery.
    10. Step image
  10. Identify and remove the 6 screws marked on the diagram
    11. Step image
  11. Remove the tape securing the cables under the battery and the BIOS battery.
  12. Your battery is free and ready to be removed.
    13. Step image
  13. The first thing to do is to disconnect the speakers
    14. Step image
  14. Remove the black protective tape from the speaker cables to separate it from the keyboard backlight (as shown in image 2)
    15. Step image Step image
  15. Using tweezers or any other tool suitable for prying (ensure it is sturdy, as the adhesive is quite rigid), gradually pry up the right and left speakers.
  16. Simply pull on the cable to bring it toward you. The speakers are now free, and you can simply reassemble everything in reverse order to finish.
    17. Step image Step image Step image
Back