Hafury Umax Disassembly

ID: 219515

Description: [youtubevideo|NKDW5jWM9o0]Use this guide to...

Steps:

  1. Power off the Hafury Umax and unplug the charging cable before you begin.
  2. Work on a clean, dry, static-safe surface with good lighting.
  3. Use metal tools only on screws, and keep them away from the battery and exposed contacts.
  4. Stop if the battery is swollen, hot, leaking, or smells unusual.
  5. Place the phone on the work surface with the visible screw heads facing up.
  6. This basic disassembly is useful when a broken charging connector requires internal access.
  7. Take a clear photo of the screw locations before removal if you want a reference for later repair work.
  8. Use a precision screwdriver to remove the visible screws from the exposed phone frame.
  9. Keep the screwdriver straight and press down firmly enough to avoid stripping the screw heads.
  10. Remove every visible screw before lifting, separating, or prying any internal parts.
  11. Group the screws by location so they don't get mixed up during any separate repair or reassembly work.
  12. Check that no visible screws remain in the area you plan to access.
  13. Do not force the frame, board, or connector area if it resists after the screws are removed.
  14. Stop here if you only need the basic disassembly covered by this guide.
  15. Power connector repair requires a separate component-level procedure.
Back