uPUNCH HN3000 AC Board Replacement

ID: 219809

Description:

Steps:

  1. Unplug the AC cord from the machine
    2. Step image
  2. Using the key, unlock and open the top part
    3. Step image
  3. Using a Phillips 1 screwdriver, unscrew the 2 screws shown in the picture
    4. Step image
  4. Plug the two cords shown on the picture
    5. Step image
  5. Pull the cables out of the zip tie
    6. Step image
  6. Unscrew the two screws shown in the picture using a Phillips 2 screwdriver
    7. Step image
  7. Remove the board and place the new one in
    8. Step image
Back