Battery Terminal Replacement

ID: 220094

Description: Follow this guide to replace a damaged battery...

Steps:

1. Start with a clean work bench

2. Use a 2.5mm allen key to remove the damaged terminals screws

3. Use some small side cutting pliers to cut and break off as much of the plastic as possible.

4. Inside the terminal there are small plastic teeth that lock the metal pin to the plastic part of the terminal.
5. Use a small screwdriver or blade to bend these teeth out of the way.
6. All need to be bent out of the way in order to remove the plastic part of the terminal.

7. Use a screwdriver to wedge out the plastic part of the terminal.
8. Push the metal post back towards batter while removing the plastic part.
9. There is some glue in behind, but no other fixings so it will come out.

10. Inspect and clean the terminal post.

11. Carefully remove the end cap of the post.
12. Use a blade to wedge it off.

13. Line up the flat sides of the new terminal with the flat side on the metal post
14. Place the plastic terminal over the metal post, and use some small needle nose plier to pull the post over the teeth so that they engage

15. Reinstall and tighten the screws
16. Reinstall the plastic end cap for the terminal post.