How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel

ID: 22866

Description: Do you ever find your scroll wheel getting...

Steps:

1. Use a Phillips #0 screwdriver to remove the stickers that are hiding the screws.
2. The sticker may or may not stick back on the mouse after you complete the cleaning. You may want to use some clear tape to replace the stickers.

3. Remove four screws using a Phillips #0 screwdriver.

4. Use a spudger to pry along the center seam of the mouse.
5. Open the outer casing of the mouse.

6. Remove the wires from the white crimp headers in order to separate the upper and lower housing units of the mouse.
7. Pull the wires as gently as possible to ensure that the wires will not break.

8. Take a cotton swab and lightly remove any dirt or debris around the pin connections of the scroll wheel.