N-Strike Nite Finder EX-3 Trigger Replacement

ID: 23384

Description: If pulling the trigger of your Nerf Nite Finder...

Steps:

1. Place the blaster upside down on the table, and remove the screw in the bottom of the handle.
2. Remove the battery door and take the batteries out.

3. Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.
4. Lift the side of the blaster off exposing its internal parts.

5. Remove the phillips head, 10.2 mm screw holding the trigger in place.

6. Remove the trigger by pulling the piece straight up.
7. Caution: Do not let the spring fly off the spring