Moser 1400 Hair Clipper: Replacing the Guide Piece

ID: 236635

Description: My Moser Type 1400 hair clipper fell on the...

Steps:

1. Use a flathead screwdriver to release the 2 screws.


2. Position the slide spring with the bend facing outward as shown in the photo.
3. Secure the slide spring using a thumb, finger, or tweezers.
4. Push the slide spring up about 2 mm so that the rail fits underneath the guide piece.

5. Insert the guide piece from below
6. important from previous step: sliding spring must leave space for the rail of the guide piece
7. Hold the sliding spring firmly while pushing up the guide piece
8. Push the guide piece all the way to the top.

9. Inserting the pivot screw is a bit tricky. Do not force it in.

10. Insert the screws, but do not tighten them yet.
11. According to the user manual, the distance between the tips of the comb and the cutter should be 0.5 to 1.0 mm. They must also be aligned in parallel.
12. Once everything is aligned correctly, tighten both screws.