Mounting and dismounting the tablet

ID: 23805

Description:

Steps:

  1. The hull seen from the front.
    2. Step image
  2. The case seen from the back, with the jacks where to connect your handsets
    3. Step image
  3. Enough to redo a shell in case of problems, but without the feet.
  4. The T14 snake-eyes tip to disassemble the facade.
  5. Collars to block the jacks of your handsets under the shell.
  6. Replacement snake eyes M6 screws, M6 inserts to remake a shell
    7. Step image
  7. Use the tip to disassemble the screws.
  8. DO IT MANUALLY!!!
  9. Not to the screwdriver, because it will rip. And the tip will damage the facade.
    10. Step image
  10. To block the jacks of the handsets: make a knot on the collar.
  11. Thus, users will not be able to disconnect the handsets
    12. Step image
  12. If you want to redo a shell:
  13. You have to cut the inserts, and pierce the bottom to pass the usb plug and the jack that connects to the tablet.
  14. Take the model delivered as an example
    15. Step image
  15. To change the content of the micro SD card:
  16. You must disassemble the facade, remove the tablet from the shell and open the "SD card" hatch
  17. Create a file named: sexbreizh.avi
  18. AVI container, mp3 audio codec, xvid video codec
  19. Audio bitrate: 44100
  20. Video rate: 8000
    21. Step image
Back