SodaStream Fountain Jet A200 Washer Replacement

ID: 31714

Description: This guide is to instruct a person on how to...

Steps:

1. With one hand, press in the two gray oval shaped buttons found on either side.
2. Gently pull back on the cover until it releases from the device.
3. Remove the back cover of the device.

4. Grasp the CO2 tank and twist it in a clockwise motion.
5. Once the CO2 tank is free, pull it towards you and lift upwards to remove it from the device.

6. Flip the device upside down.
7. Locate the washer, this will be in the valve where the CO2 tank was located.
8. Using tweezers, remove the old/ extra wash and insert a new washer if needed.
9. For your machine to function properly, there should only be one washer present.