Felt Z85 Brake Pad Replacement

ID: 31760

Description: The brakes on anything that moves are...

Steps:

1. Pull up on brake-release lever to spread pads for easy access.
2. Release lever on the right side of the wheel.
3. Loosen left nut on wheel until wheel comes free.

4. Locate Brake Caliper.
5. Use 4.0 mm allen key to remove main bolt.
6. Rotate counterclockwise to loosen.
7. Be careful not to lose both the washer and spacer found in-between the bolt and the brake pad mounting hole.
8. Repeat step 2 to remove the pad on the other side.

9. Brake Pad: The item being replaced.
10. Spacer: This item will be reused.
11. Washer: This item will be reused.
12. 4 mm hex bolt.
13. Note order of mounting hardware for reinstall.