Sony Reader Touch Edition PRS-600 Battery Replacement

ID: 31867

Description:

Steps:

  1. Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.
    2. Step image
  2. Slide the back cover off by pushing it to the left, away from the side that held the screws.
  3. Remove the cover.
    4. Step image
  4. This is what the device should look like once the back cover panel has been removed.
    5. Step image
  5. Once the back cover has been removed locate the battery in the bottom right corner of the device.
  6. Using the pointed end of the spudger, push out the white plug that is connected to the battery from its beige base.
    7. Step image
  7. Use the flat end of the spudger to pry the battery out of its holder. There may be glue holding it in place.
    8. Step image
Back