Nvidia Shield Fan Replacement

ID: 31905

Description: The Nvidia Shield controller uses an internal...

Steps:

1. Remove the seven 6.4mm T5 Torx screws from the back panel.
2. Use the spudger to separate the front and back panels.

3. The green grill is not screwed in so it can be pulled right out.

4. Remove the six 6.5mm T5 Torx screws.
5. Disconnect the power wires.
6. Peel back the copper tape and disconnect the black and white wires.

7. Pull the battery apparatus out once all cables are removed.

8. Cooling is important for electronics, the last thing they want is to overheat.
9. Remove the two 7.3mm and four 8.4mm T5 Torx screws and disconnect the power cable.
10. Lift the fan free after the screws and cable are removed.