Toshiba Excite 10 AT300 Speaker Replacement

ID: 31921

Description: This guide will walk through how to open up the...

Steps:

  1. Remove the SD card from the SD card slot.
    2. Step image
  2. Use the opening tool to separate the front and rear panels by slipping the tool underneath the screen edge and sliding it around the entire device.
  3. Make sure you unclip all of the clips on the back panel, or pulling it off will be difficult and may damage the tablet.
    4. Step image Step image Step image
  4. Remove the speaker cable from its socket by gripping both sides of the white connector piece with tweezers and pulling straight out.
  5. Be careful not to rip the wires out of the white connector piece.
    6. Step image Step image Step image
  6. Using either your hands or tweezers remove the 3 pieces of tape holding the speaker wires to the back panel.
    7. Step image
  7. Using a #00 Phillips screwdriver, remove the four 3mm #00 Phillips screws that hold the speakers in place.
  8. Using your hands, remove the old speakers from back panel of tablet.
  9. Place the new speakers where the old speakers were and in the same orientation.
    10. Step image
Back