Cen-Tech Seven Function Digital Multimeter Circuit Board Replacement

ID: 32041

Description: In order to remove and replace the circuit...

Steps:

1. Place the meter face down, and the back panel and screws can be seen.

2. Unscrew the two 9mm screws on the back panel using a #0 Phillips screwdriver.

3. Remove the back panel of the device by lifting upward.
4. Remove the battery from the meter before continuing.

5. Remove the four 7mm Phillips screws holding the circuit board in place.

6. Gently lift the circuit board away from the device casing.
7. Remove the battery after removing the back cover to reduce the chances of short-circuiting the circuit board.