Philips Bluetooth adapter AEA2700 Teardown

ID: 34782

Description: How to open the device and what you'll find...

Steps:

1. here you can see the view from the top, the bottom and the backface - device is really tiny: only 7,5cm in diameter!

2. Remove 2 of the rubbers on the bottom side - you'll find 2 screws afterwards>> unscrew them ;)

3. now simply remove the top cover.

4. there's only one external component connected by cable: the NFC tag
5. it's easily possible to remove the circuit
6. lift it on the front side of the device
7. and pull it this direction - it helps to push at the cinch connector!

8. Front- and backview of the circuit

9. when reassembling take care to stick the NFC tag to the correct location in the cover