Samsung Galaxy Note 4 Micro-USB Port Daughterboard Replacement

ID: 35006

Description: Use this guide to replace the Micro-USB port...

Steps:

  1. Use a fingernail or vinyl spudger to easily remove the back cover of the device. Remove the S-Pen, battery, SIM card and MicroSD card (if present).
    2. Step image Step image Step image
  2. Remove the sixteen 4.0 mm Phillips #00 screws securing the midframe to the display assembly.
    3. Step image Step image Step image
  3. Heat with a low degree and cut the sticker along the side of touch panel.
    4. Step image Step image
  4. Free the clasps along the battery slot. And the push the front assembly out from middle housing with effort.
  5. We can see the USB board but we can't tear it down directly. Because 1. The USB board flex connector is connecting on the back of the motherboard. 2. If want to remove motherboard, the LCD screen need to be removed at first. 3. The USB board assembly comes with two touch keys together but they are placed under the touch panel.
  6. So we have to remove the motherboard and LCD screen at first next.
    7. Step image Step image Step image
  7. Cut the adhesive under the screen, release the connectors and remove the LCD screen. You can see more details when remove the LCD screen at Samsung Galaxy Note 4 LCD screen replacement guide.
    8. Step image Step image Step image
  8. Remove two pcs of signal flex cable and two screws which securing USB board and motherboard.
    9. Step image Step image
  9. Release all the connectors connecting with motherboard.
    10. Step image Step image
  10. Pry up the motherboard and release USB board connector from back.
    11. Step image Step image
  11. Loosen the touch keys from adhesive at first. And then pry up and remove the USB board finally.
  12. It's complicated to do Samsung Galaxy Note 4 USB board assembly replacement. We have to replace the LCD screen and motherboard at first, please be careful.
    13. Step image Step image
Back