TP-LINK 2-Way Audio Wireless Surveillance Camera Wireless Card/Shield Teardown

ID: 35543

Description: Hey im Marios!I Make repairs on everythink you...

Steps:

  1. Remove the 2 screws holding the back cover!Should be fairly easy(You need a Phillips Screwdriver)
    2. Step image
  2. This is also fairly easy to do!You can use your hands to pull it off!Put first use a flat screwdriver to open the "clips"
    3. Step image
  3. Remove the board from the Surveillance Camera!
    4. Step image
  4. Remove the wireless card which is hold by 2 "clips"!
    5. Step image
  5. Remove the cable antenna now!And thats it you are done,now just follow the guide in reverse and install your new wireless card/antenna if also needed!
  6. WARNING:DO THIS CAREFULLY!ITS SUGGESTED THAT YOU DO THIS STEP SLOWLY!TAKE YOUR TIME OR YOU MAY DAMAGE THE CABLE OR EVEN THE BOARD!
    7. Step image
Back