BMW M-Colored LED Front Kidney Grille Installation

ID: 35787

Description: Did you know that you don't have to stick with...

Steps:

  1. You will need to remove a couple of bolts on the front bumper before you can start removing the BMW factory kidney grille.
    2. Step image
  2. When you have enough clearance space, you can wedge your hand in between the gap to pop out the stock kidney grille.
  3. Keep maneuvering your hand in the space to ease the stock grille out.
    4. Step image Step image Step image
  4. Detach the stock kidney grille from the clips holding it onto the BMW front bumper.
    5. Step image
  5. Pull out the factory kidney grille.
    6. Step image Step image
  6. Use your hand to apply a bit of pressure to pop the new LED M-stripe kidney grille in place
  7. Secure the new LED grille onto the clips.
  8. Note: the M-Colored LED stripe is only on the right grille assembly.
  9. Tap the wire to the ACC or other 12V power source.
  10. Repeat on the other side.
    11. Step image Step image
  11. Put the bolts back into the BMW front bumper.
  12. Enjoy your new M-Colored BMW LED Illuminated kidney grille.
    13. Step image
Back