DeWalt D28110 Pinion Replacement

ID: 37648

Description: In this guide you will take apart the pinion " ...

Steps:

1. Using the T-15 screwdriver, remove the four 22-mm torx screws on the gear case.
2. Unplug the grinder before any disassembly.

3. Pull out the gear case.

4. Using the T-15 screwdriver, remove the four torx screws.

5. Remove the gear case cover from the gear case.

6. Using a 10-mm wrench, remove the hex nut by rotating counter-clockwise.

7. Remove the armature assembly from the gear case.
8. Remove the pinion from the armature assembly.