Nostalgia Electrics PCM805 Stand Replacement

ID: 37681

Description: Use this guide to replace the stands on the...

Steps:

1. Unplug the device before following this guide.
2. First, place the device on its side, making sure the switch is not facing down.
3. Remove the eight 12mm Phillips #02 screws from the base.

4. Gently separate the panel from the device.
5. Be sure not to tug at the wires that are still connected.

6. Locate the four 10mm Phillips #02 screws on the inside of the panel.

7. Remove the screw of the foot you plan to replace.
8. Place your finger on the back of the the foot you are unscrewing for support.