Motorola Moto 360 Rear Cover Replacement

ID: 37843

Description: This panel should be removed to get to all of...

Steps:

  1. Set the watch face down on a flat surface.
  2. Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.
    3. Step image
  3. Follow the instructions here to remove the back cover without force by using some needles in the right places:
  4. Motorola Moto 360 Case Locking Fastener Replacement
  5. Then continue with step 5. Or don't use needles and just continue with the next steps.
  6. Gently slide the blue opening pick between the rear cover and the metal casing.
  7. The rear cover is extremely fragile. Be very delicate when using the opening pick.
  8. Work your way entirely around the rear cover.
  9. It may take several attempts of reheating the adhesive to get the rear cover loose enough to pull off.
    10. Step image Step image
  10. Once the adhesive has been successfully loosened, gently pull the rear cover off.
    11. Step image
Back