DeltaLab CT-40 Chromatic Tuner Input Jack Port Replacement

ID: 37953

Description: Is your input jack broken in your chromatic...

Steps:

1. First, open the metal stand to access the screws without damaging the body.

2. Remove the 3 outer 1.2 mm Phillips #1 screws using a small head screwdriver.

3. Remove the back casing to reveal the inner circuitry.

4. Locate the different parts of your tuner, finding the broken input jack port.

5. Snip the wires attached to the input jack port using the wire cutter as close to the input jack port as possible.

6. Take your new input jack port and solder the wires to the corresponding connection areas on the new port.
7. Learn how to solder (here).

8. Fold the wires back and put the new input port into the slot where it belongs on the tuner.

9. Replace the casing and 3 1.2 mm Phillips #1 screws using the screwdriver.