Roku XD 2050X Composite Video Port Replacement

ID: 37969

Description: Use this guide to replace a damaged or...

Steps:

  1. Ensure the Roku XDis unplugged.
  2. Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.
  3. Turn the device upside down.
  4. Remove the two rubber pads using a plastic spudger.
    5. Step image Step image Step image
  5. Remove the two Phillips #1 9mm pan-head screws.
    6. Step image Step image
  6. Insert spudger between upper and lower frame underneath the port access.
  7. Guide spudger around to loosen upper and lower frame to pry frame apart.
  8. Gently remove upper frame.
    9. Step image Step image Step image
  9. Remove the two Phillips #1 8mm pan-head screws.
    10. Step image Step image
  10. On the side of the board opposite the ports, find and tilt back the tab securing the board in place.
  11. Lift the motherboard out of the lower frame.
    12. Step image
  12. Desolder the leads for the composite video port that are circled.
  13. Remove the video port from the board.
  14. For help with soldering view the iFixit soldering guide.
    15. Step image
Back