RCA RCT6272W23 Speaker Replacement

ID: 40571

Description: In this guide, you will learn how to replace...

Steps:

1. Use a Phillips #00 screwdriver to remove both 4.1 mm screws at the top of the device which hold it together.

2. Press the plastic opening tool into the space between the front and back portions of the case.
3. Run it along the perimeter of the device to unhook the plastic tabs.
4. Gently pull both sides apart.
5. The speaker is connected to the back cover, so be careful when separating.

6. Remove the soldered wire connections to the speaker.
7. Soldering irons can cause burns and severely damage your device. If in doubt, pause and think about it.
8. For more information about soldering, check out this guide.

9. Pry the speaker gently out of its plastic enclosure using a spudger.