RCA RCT6272W23 Rear Camera Replacement

ID: 40574

Description: In this guide, you will learn how to replace...

Steps:

1. Use a Phillips #00 screwdriver to remove both 4.1 mm screws at the top of the device which hold it together.

2. Press the plastic opening tool into the space between the front and back portions of the case.
3. Run it along the perimeter of the device to unhook the plastic tabs.
4. Gently pull both sides apart.
5. The speaker is connected to the back cover, so be careful when separating.

6. Use a soldering iron to remove the soldered connections on the motherboard
7. For your safety and to ensure a correct repair, be sure to exercise caution when using the soldering iron.
8. For more information about soldering, check out this guide.

9. Use a philips #00 screwdriver to unscrew the three 4.064mm screws which attach the motherboard to the front of the device.

10. Use your fingers to pop the three black tabs up to release the flat plastic data transfer cables.

11. Pull up the motherboard from the rest of the body.

12. Using a spudger, gently pry off the camera from the back of the display