Ryobi P202 Right Side Case Replacement

ID: 40619

Description: This guide covers the removal process of the...

Steps:

1. The battery can shock you. Only touch plastic, non-conductive components.
2. Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

3. Use a Torx T10 screw driver to unscrew all ten 13.5 mm screws from the drill casing to gain access to the interior.

4. Gently lift the casing from the drill body.
5. Take the casing completely off the drill body to gain access to the interior of the drill.
6. The Ryobi P202 casing has Part #: 200690001