Dell Latitude E4200 SSD Replacement

ID: 40743

Description: Follow these steps in order to successfully...

Steps:

  1. Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.
    2. Step image
  2. Place thumbs flat on the front side of the back panel (the side to open the laptop).
  3. Push panel upwards sliding it out of the locked position.
  4. Lift panel out of socket.
    5. Step image Step image Step image
  5. Remove panel and screw from the device. This opens up the main board of the device.
    6. Step image
  6. Unscrew the two 4.10x4.05 mm screws holding the SSD in place.
    7. Step image
  7. Using your finger and thumb lift the hard drive out of the computer but do not disconnect the attached connector to the computer.
    8. Step image
  8. By applying pressure to the sides of the connector, pull the connector apart from the SSD.
    9. Step image
Back