Nobis NB09 Battery Replacement

ID: 40902

Description: This guide will show you how to replace the bat...

Steps:

1. Before beginning this process, make sure the device is powered off.
2. Remove the screws holding the case together.

3. Use an opening tool to loosen and pry off the pink back plate.

4. Remove the black electronic tape covering the circuit board.

5. Use the soldering iron to remove the black and red wires from the circuit board.
6. The black wire is the ground and the red wire is the battery positive terminal.
7. To reassemble, use the soldering iron to solder the leads at the end of the black (-) and red (+) wires from the new battery onto the proper terminals on the circuit board.

8. Gently loosen the adhesive under the battery to avoid damaging it.
9. Use caution; the battery is soft and will bend very easily.
10. Dispose of the old battery properly at an electronic waste center or verified battery recycling store.
11. When reassembling, apply adhesive to the back of the new battery.