Propel Gyro-X Stabilizer Replacement

ID: 40926

Description: After rough flights the stabilizer beam may end...

Steps:

1. Stabilizing links are easy to break. Be gentle when prying them off.
2. Place the tweezers on the sides of the links and pull straight away from the top point of connection.

3. Remove the two 6.0 mm Phillips #00 screws from the rotors.

4. Pull the rotors away from the mounting brackets.

5. Remove the two 5mm PHillips #00 screws screws

6. Using the tweezers twist the rotor attachment bracket apart.

7. Remove the two 6mm #00 screws

8. Pull up on the stabilizer assembly to remove it completely from the drive shaft.