Pioneer R1 Touch Screen Replacement

ID: 40928

Description: This guide will walk you through the process of...

Steps:

1. Insert your plastic spudger in the opening near the HDMI port.
2. Gently pry the back cover of the R1 from the the front by using the spudger along the edges.
3. Do not pull the back cover straight off the R1 as components of the speakers will be attached to both sides.

4. Lay the R1 flat like an open book.
5. This will prevent the speakers from becoming disconnected from the motherboard.

6. Remove the tape that is holding the motherboard to the display and covering the cable attachments.
7. Peel back just the end of this tape to free the front facing camera.

8. Remove the three 4 mm screws along the base of the motherboard with a Phillips #00 Screwdriver.

9. Disengage the two cable locks using your spudger or your finger nail.
10. Slide the cable free from the disengaged lock.
11. Do not pull across the cables as this may tear and permanently damage it.

12. Insert your spudger between the LCD display and the touch screen.
13. Gently pry the LCD display from the the touchscreen by using the spudger along the edges.

14. Once disengaged, remove the LCD display from the touchscreen.