Mr. Coffee BVMC-SJX33GT Base Replacement

ID: 40931

Description: This replacement guide would be useful if your...

Steps:

  1. Turn your coffee maker over so that the base is facing up.
    2. Step image
  2. Locate the seven 13.5mm screws securing the base to the coffee maker.
  3. Unscrew the screws using a #2 Phillips head screwdriver.
  4. Use a screwdriver with a magnetic tip to more easily remove the three screws in the back and two in the middle.
    5. Step image Step image
  5. Also the front two screws are safety screws: they have a 6 sided star shape with a raised dimple in the center to prevent homebodies from casually opening the machine. (probably from the Sunbeam’s (owns Mr. Coffee) legal dept.) Anyway you will need a security bit to remove the screws and not a phillips screw driver.
    6. Step image
  6. Lift base to remove.
  7. If the base sticks along one edge, do not pull at an angle. Gently tug straight up while sliding a finger along the edge in order to pop the clips.
    8. Step image
Back