Acer Iconia A100 Battery Replacement

ID: 40962

Description: A step-by-step guide that illustrates the...

Steps:

1. Start at any side of the tablet.
2. Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.
3. Work your way around the tablet.
4. There are four side pieces in total.

5. Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.

6. Carefully separate the back piece from the device using a plastic opening tool.
7. Remember to open along the entire perimeter of the tablet.

8. Turn the tablet over so that the battery is facing upwards.
9. Remove the four 4mm screws located around the battery.

10. Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.
11. Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.
12. Be sure to not have any water around the device while removing the battery.
13. Be sure to be cautious while removing the battery and remove carefully; avoid ripping the wires attached to the battery.