SuperTooth Buddy Battery replacement

ID: 49808

Description: Replacing the battery in the SuperTooth buddy...

Steps:

  1. Carefully lift off the glued on cover.
    2. Step image
  2. Remove the two screws on the right.
  3. There is also a small screw to the left of the green button
    4. Step image
  4. There are also two screws on the back that need to be removed
    5. Step image
  5. Be careful when lifting off the cover so as not to damage the two thin speaker cables.
  6. Carefully remove the two screws holding the circuit board in place.
  7. The battery is located under the circuit board
    8. Step image
  8. Order a replacement battery online.
  9. Li-ION 3.7V 650mAh 2.41 Wh
  10. Make sure that the new battery has the same dimensions as the old one. (In this case it was approx. 50mm x 30mm x 4mm.
    11. Step image
Back