Infant Optics DXR-8 Monitor Replacement

ID: 49823

Description: The disassembling of the monitor is so to be...

Steps:

1. Start by gently inserting the plastic opening tool between the led and casing.

2. Slowly pry the cover away from the bottom using the plastic opening tool.

3. Glide the tool around the entire cover to reveal the screws, which are 5.0 mm.

4. Remove the cover and set it aside.

5. Remove the four corner screws, 5.0 mm, using a J1 bit.
6. Lift the top away from the bottom using the metal spudger. Be careful not to rip the antenna wire.