Zeki TBQG884B Rear Case Replacement

ID: 50073

Description: This guide will assist you in replacing the...

Steps:

1. Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.

2. Place the tablet down so that the screen is facing away from you.
3. Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.
4. Gently work your way around the perimeter of the tablet's edge.

5. Remove the back cover
6. Remove any tape on the speaker and detach the speaker from the back plate.
7. The speaker is connected to the motherboard by two soldered wires. Don't break them when you remove the speaker.