HTC One X Plus Motherboard Replacement

ID: 50293

Description: Use this guide to replace the motherboard on a...

Steps:

1. Power off your device.
2. Insert a pin, paper clip, or very small piece of metal into the hole next to the micro sim card holder to remove it.
3. The Sim Card Slot is located on the top edge of the device.

4. Using plastic opening tools, pry open the bottom of the device first.
5. You will hear clicking sounds as the sides of the device detach from the screen.
6. Once both sides are detached, use the suction cup tool to remove the screen completely from the black encasing.

7. Using a Philips head screw driver, remove the five 2.4mm screws that are pictured. Then remove the plastic cover.
8. Once you have disassembled your device the warranty will no longer be valid.

9. Use the J000 Philips screw driver head to remove the screws as pictured.
10. There are two 3.4mm screws to be removed.
11. Remove the PCB board and the antenna.

12. Using tweezers, disconnect the power button flex cable.
13. Then disconnect the touch screen flex cable.

14. Disconnect the battery from the logic board.
15. Look for a white six pin connector.
16. Remove the battery by pulling upwards.

17. Disconnect the remaining two flex cables following the same procedure from Step 5.
18. Once these two flex cables have been disconnected, you may now remove the motherboard.