Black and Decker JE2200B Motor Compartment Replacement

ID: 50321

Description: The motor compartment is located on the bottom...

Steps:

1. To replace the motor compartment, first follow the Disassembly Guide here

2. Use the 2.5 mm Flathead adapter to remove the 13.5 mm screws from the bottom of the juicer. The screw head diameter is 5.2 mm.

3. Carefully remove the bottom off the rest of the machine.

4. Lay the juicer horizontally and roll the top shaft cover until it comes off.

5. Unscrew the 19.1 mm screws inside the juicer holding the motor compartment attached to the juicer. Use the 2.5 mm Flathead adapter as the screw driver. The diameter of the screw head is 7.1 mm.

6. Remove the motor compartment from the juicer and it is ready to be replaced.