Digital2 D2-912 Motherboard Replacement

ID: 52007

Description: This repair is necessary if the motherboard of...

Steps:

1. Remove the two Phillips #00 screws from the bottom of the case.

2. Wedge the opening tool in the space between the back and the front of the tablet.
3. Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.
4. When the back of the tablet is mostly detached from the front, carefully pull it away completely.

5. Remove the wires shown in the image, using a soldering iron and solder sucker.
6. By removing the wires, you are detaching the battery and speaker from the motherboard.

7. Use the Phillips #00 screwdriver to remove the three screws from motherboard.

8. Detach the capacitive touch controller from the motherboard.
9. Carefully pry the narrow black connector upward to release the ribbon.
10. Remove the ribbon from the connector.

11. Locate the camera found in the image.
12. Carefully pry the black connector upward to release ribbon.
13. Remove the black tape to release the camera from the motherboard.
14. Remove the ribbon from the connector.
15. Remove and replace the motherboard.