Le Pan S Battery Replacement

ID: 52061

Description: If the battery is too low for the device to...

Steps:

1. Remove the two 3.5 mm Phillips #00 screws that are covered by the micro SD port.
2. This cover is adjacent to the volume button on the side of the Le Pan S.

3. Insert the spudger between the front and back panel in order to pry them apart.
4. Do this beside the volume button and the micro SD cover.
5. Pry open the rest of the Le Pan S by dragging the spudger across the side.

6. Once the front and back faces are completely separated, remove the back cover to reveal the inside components.

7. Disconnect the battery from the circuitry and lay it out of the way.
8. The best method to complete this is to pull the bundled cable connector out with your hands. Pull towards the wires and away from the electrical board. Use the spudger to further coax the cable out.
9. If you are replacing your battery, make sure to dispose of it properly.