Le Pan S Volume Rocker Replacement

ID: 52062

Description: First, check to see if the volume is turned up...

Steps:

  1. Remove the two 3.5 mm Phillips #00 screws that are covered by the micro SD port.
  2. This cover is adjacent to the volume button on the side of the Le Pan S.
    3. Step image
  3. Insert the spudger between the front and back panel in order to pry them apart.
  4. Do this beside the volume button and the micro SD cover.
  5. Pry open the rest of the Le Pan S by dragging the spudger across the side.
    6. Step image Step image
  6. Once the front and back faces are completely separated, remove the back cover to reveal the inside components.
    7. Step image
  7. Disconnect the battery from the circuitry and lay it out of the way.
  8. The best method to complete this is to pull the bundled cable connector out with your hands. Pull towards the wires and away from the electrical board. Use the spudger to further coax the cable out.
  9. If you are replacing your battery, make sure to dispose of it properly.
    10. Step image Step image
  10. Remove the four 2.5 mm Phillips #00 head screws from the circuit board near the top of the tablet.
    11. Step image
  11. Pull out the volume rocker by carefully moving it side to side with your fingers.
    12. Step image
Back