HP Envy 23-d060qd TouchSmart Hard Drive Replacement

ID: 52112

Description: My computer doesn't have enough room anymore...

Steps:

1. Use your hands to unclip the plastic snaps on the back panel of the device.

2. Remove the three 11.5mm PH2 screws from the back panel.
3. The screws will not fall out of the back panel, but they will unscrew to release the back panel.

4. Now, take the back panel off by pulling at it gently with your hands.

5. Remove the one 13.5mm PH2 screw.

6. Unsnap the wire mechanism to release the hard drive.

7. Detach the hard drive assembly by pulling it out of the socket.

8. Remove the two 8.5mm PH2 screws on each side of the hard drive cover.

9. Detach the hard drive cover by sliding it off from the rest of the hard drive
10. Replace the old hard drive with your new hard drive.