HP Envy 23-d060qd TouchSmart Speaker Replacement

ID: 52211

Description: My computer won't play audio even though I've...

Steps:

1. Use your hands to unclip the plastic snaps on the back panel of the device.

2. Remove the three 11.5mm PH2 screws from the back panel.
3. The screws will not fall out of the back panel, but they will unscrew to release the back panel.

4. Now, take the back panel off by pulling at it gently with your hands.

5. Remove the receiver for the keyboard and mouse with your hands.

6. Remove the four 17.5mm T15 screws from the speakers.
7. Remove the five 7.5mm T15 screws from the cover plate.
8. Remove the cover plate with your hands.

9. Disconnect the two speaker connections from the motherboard with your hands. Use your hands to gently pull the plastic piece at the ends of the wires.
10. Be gentle when disconnecting any wired connections. Pulling on the wires can damage them.

11. Remove the speakers from the computer, and if needed, separate by disconnecting the wires between them.
12. Be gentle when separating wired connections. Pulling on the wires can damage them.